Data destruction standards: NIST 800-88, IEEE 2883 and DoD 5220.22-M
NIST SP 800-88 is the reference standard for erasing data from storage media in the United States. NIST published Revision 2 in September 2025. IEEE 2883-2022 adds technical detail for specific storage technologies. If a provider still leads with DoD 5220.22-M, ask why: it was written for older drives.
Clear, purge and destroy
NIST describes three levels of sanitization. Clear uses standard read and write commands to overwrite data and protects against simple recovery. Purge uses methods such as the drive's built-in secure erase or cryptographic erase to protect against laboratory recovery. Destroy physically ruins the media so it can't be used again.
Clear and purge leave the drive reusable, which keeps resale value. Destroy ends its life.
IEEE 2883-2022
IEEE 2883 specifies how to sanitize specific storage technologies, including hard drives, SSDs and other flash media, using each device's own commands. Providers who wipe SSDs should be able to explain how their process meets it.
Why DoD 5220.22-M is outdated
The DoD three-pass overwrite method was designed for older magnetic drives. It doesn't address SSDs, where overwriting can miss data held in spare memory areas. Mentioning it isn't a red flag by itself, but your contract should reference NIST SP 800-88.
Wipe or shred?
Wipe drives that are working and worth reselling, and verify each wipe. Shred drives that failed, won't verify, came from your most sensitive systems, or have no resale value. Your policy can require shredding for specific data classes regardless of value.
What your certificate should show
A useful certificate of destruction lists each device's serial number, the method used (wipe standard or shred), the date, the location, and the company and technician responsible. Weight-only certificates don't prove what happened to a specific drive.
Common questions
Does a factory reset count as data destruction?
No. A factory reset on a laptop or phone may leave data recoverable, and it produces no record. Use a verified wipe that meets NIST SP 800-88, or physical destruction, with a serial-level certificate.
Is degaussing enough?
Degaussing erases magnetic media such as hard drives and tapes, but it has no effect on SSDs or other flash storage. It also usually leaves hard drives unusable, so it's effectively destruction, not a wipe.
Sources
- NIST SP 800-88 Rev. 2, Guidelines for Media Sanitization (Sept. 2025)
- IEEE 2883-2022, Standard for Sanitizing Storage
Reviewed November 2026. Laws change; confirm current requirements with the agency or your counsel.